UV Curable Moisture and Chemical -Resistant Form-in-Place Gasket Technology
Central Coating is now offering the latest generation in Form-in-Place (FIP) Gasket Application using UV curing dispensing technology. This process and material is used for sealing Plastic, Glass, Metal and Plated surfaces and enclosures. The dispensed gaskets acts as a moisture seal preventing air, dust, liquids, gaseous substances and dirt from penetrating the enclosure. The gaskets are cured in-line, increasing production speeds and turn-around times. These curable materials contain no nonreactive solvents and are silicone free! These materials conform to intricate channels and recesses.
Benefits of UV Curable FIP materials:
• Faster Processing
• Greater Output
• Lower Assembly Costs
• Tack-Free
• Silicone Free
• Moisture & Chemical Resistant
• Soft & Durable
• Conforms to Intricate Channels and Geometry
For more information or for a sample of this material, please visit us at www.centralcoating.com or call us at 508-835-6225.
To see a short video of the process click on video:
UV/Light Curing Form in Place Gaskets
UV Curable Conformal Coating Technology
Conformal Coating provides protection against fungus, moisture, corrosion, thermal and mechanical shock to PCBS. It will also provide electrical isolation. We now have the ability to apply UV and moisture-moisture cure “re-workable” conformal coatings. These coatings are engineered for thicknesses up to 0.254mm (0.010 in) and contain no nonreactive solvents. The ability to UV cure in seconds allows for faster and greater outputs and lower processing costs. These materials are in full compliance with RoHS Directives 2002/95/EC and 2003/11/EC.
Benefits of UV Curable Conformal Coating Materials:
• Faster Processing
• Greater Output
• Lower Assembly Costs
• Superior Re-workability
• Low VOC
• Chemical Resistance
Central Coating have a dedicated ESD protected area for this process, which meets or exceeds the ANSI/ESD S20.20 requirements. Our in-house ability to manufacture custom masking plugs and boots ensures process reliability and quality while reducing cost. We also offer potting, encapsulation and stripping of coated boards for rework. We are ITAR compliant and registered with the US Department of State. We apply all MIL-I 46058C/IPC-CC-830 coatings. We provide Conformal Coating Services from prototype to production volume . Our Standard lead-time is 5-7 days and we also offer quick turnaround in as little as a day. A wide variety of in-stock coatings are available.
For more information These material, please visit us at www.centralcoating.com or call us at 508-835-6225. For information in industrial vacuums or explosion proof vacuums, visit Hafcovac,